ROLLERS WITH IMPACT MOLDED ROLLS
Rollers with impact molded rolls damper shocks caused by material falling and avoid belt damage. Non-abrasive molded rubber rolls are flush fitted on the rollers
and fixed to the ends with stop rings. The narrow molded rolls width gives greater
belt surface contact and reduces wear and tear. Spare molded rolls are available
NON-GRIP ROLLERS WITH TYPE
Sticky transported material accumulates on regular roller sleeves and causes strong belt banking. Molded rubber disc rolls placed on the rollers prevent this from happening. With complex systems, it is often necessary to give more support to belt edges. This can be done by adding a molded disc rolls at each end.
NON-GRIP ROLLERS WITH TYPE “B” MOLDED DISC ROLLS
These rollers operate like Type A non-grip rollers. However, they can tackle more difficult tasks. Adding end molded couplings supports belt edges, keeps it in place as it tends to arch. The supported belt edges keep it from swaying and therefore ensure longer belt life.
NON-GRIP ROLLERS WITH MOLDED RUBBER SPIRALS SG
Type SG Rollers with molded rubber spirals function the same way as molded disc rolls rollers. They also keep the belt clean and centered. Two non-abrasive molded rubber couplings are fitted on the roller with a left-right molded spiral and blocked at the ends with stop rings. Belt cleaning is by an Archimedian screw effect which rotates the roller and expels material from the sides. The molded spiral also keeps the belt centered through its motion.
NON-GRIP ROLLERS WITH STEEL SPIRALS SA
Type SA steel spiral rollers function the same way as molded disc rolls rollers. They also keep the belt clean and centered. Spiral rods are welded on the opposite right and left ends directly on the casing. Belt cleaning is by an Archimedian screw effect which rotates the roller and expels material from the sides.
The spiral also keeps the belt centered through its motion.
CANTILEVER ROLLERS (BELT GUIDE)
Belt guide rollers are available in the GAMMA, DELTA, SIGMA, OMEGA series. Generally used as belt guides, conveyor retaining rollers, flow brackets and components for 2 roll trougher stations.
2-ROLL TROUGHER STATIONS
2-Roll trougher Stations support the top conveyor belt run. These stations are made with series 800 and 400 supports which are shaped, extremely sturdy, and functional. The supports are made of cold pressed steel shaped to keep the material from wedging between the rotating roller parts and its support.
3-ROLL TROUGHER STATIONS
3 Roll trougher stations support the top conveyor belt run. These stations are made with series 700 and 500 supports which are shaped, extremely sturdy and functional. The supports are made of cold pressed steel shaped to keep the material from wedging between the rotating roller parts and its support. The central supports give a minimum space between rollers to ensure longer belt life.
SELF-CENTERING FLAT STATIONS
Self-centering return stations have the same characteristics as the simple return stations. However they also support slight belt banking and help the belt return on its correct track during operation. They can also be equipped with side belt guide rollers.
Cantilevered groups with two rollers support top conveyor belt run. These cantilevered groups are made with specifically designed supports which incline the rollers by 20° or 25°. They are shaped, extremely sturdy, functional and have perforated anchor plate. The supports are made of cold pressed steel plate which are shaped to block the two opposite cantilever rollers.
HANGING ROLLER GROUP
Hanging roller groups have Omega series rollers connected by swinging steel plates hung at both ends. Different hooking options are available depending on the needs.
CONVEYOR BELT SCRAPER
HIGHT QUALITY BLADES for long term durability and perfect maintenance of the belt
MAXIMUM CLEANING Very high level of cleaning even for resinous or tacky materials.
DURABILITY Due to the adoption of blades made of an extremely hard alloy, an extended life can be achieved along with the elimina tion of intermediate maintenance.
ELASTICITY & SECURITY elastic support, a perfect adherence to the surface of the belt is achieved along with an automatic disengagement due to abnormal resistance from oreign objects embedded in the belt.
INSTALLATION Easy installation on existing frames.
LOW COST Elimination of high maintenance requirements, extremely low downtime required for blades replacement.
ANTI-ADHESION Materials removed do not accumulate on the blade holder because of their vertical position and the stresses and vibration of the elastic damper.
INSTALLATION GUIDELINES The belt speed must be between 36 and 197 inches. (1 & 5 meters) per second. The cleaner is not compatible with metallic fastners or mechanical joints. The elastic rubber blocks are suitable for use in ambient temperatures between -9°F and +176°F (-25°C and +80°C)